Salt Shaker stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement screw-in stopper for the fill hole of some really common, cheap wood salt shakers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
These are cheap, really common wood salt and pepper sets. The salt shaker's fill hole is threaded, but the cheap stopper it came with was blow molded, and after a few years, it started to tear with the torque of screwing it in. Before I got a 3D printer, I filled the old part with epoxy clay, and it worked okay. But this was one of my first practical repair parts I printed with my original printer (a TronXY X1).
It seems likely this plug will fit a fair number of different salt shakers. The bore hole diameter is 22mm, and the thread pitch is 4mm.