1 / 8
Snapmaker J1 / J1S PTFE tube guide M6 and M10 — zdjęcie 1
1 / 8

Snapmaker J1 / J1S PTFE tube guide M6 and M10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to connect M6 or M10 PTFE connectors, at an angle. Will not work with the standard lid on.

Ocena
5 / 5
Polubienia
11
Pobrania
128
Wydruki
1
Wyświetlenia
1020
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Makes it easier to feed filament into the extruder with this attached PTFE tube connector.

This will not work with the standard lid on, you need to print an elevation adapter like this 
https://www.printables.com/model/423836-snapmaker-gehauseerhoung-mit-verbunden-teilen or this: https://www.printables.com/model/314200-top-panel-riser-for-snapmaker-j1

I personally used the first one at 2X the height.

UPDATE: The M10 version proved too thick, and did not work well. I suggest using “J1-ptfe-adapter v5.3mf” with a thinner PTFE and M6 connectors, running though the stock PTFE guides to avoid tangling the tubes.

Tagi