1 / 8
Snapmaker J1 / J1S PTFE tube guide M6 and M10 — image 1
1 / 8

Snapmaker J1 / J1S PTFE tube guide M6 and M10

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adapter to connect M6 or M10 PTFE connectors, at an angle. Will not work with the standard lid on.

Rating
5 / 5
Likes
11
Downloads
128
Makes
1
Views
1,020
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Makes it easier to feed filament into the extruder with this attached PTFE tube connector.

This will not work with the standard lid on, you need to print an elevation adapter like this 
https://www.printables.com/model/423836-snapmaker-gehauseerhoung-mit-verbunden-teilen or this: https://www.printables.com/model/314200-top-panel-riser-for-snapmaker-j1

I personally used the first one at 2X the height.

UPDATE: The M10 version proved too thick, and did not work well. I suggest using “J1-ptfe-adapter v5.3mf” with a thinner PTFE and M6 connectors, running though the stock PTFE guides to avoid tangling the tubes.

Tags