1 / 3
Sheath for Victorinox 6" Fibrox Semi-flex Boning Knife — zdjęcie 1
1 / 3

Sheath for Victorinox 6" Fibrox Semi-flex Boning Knife

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sheath for a Victorinox Fibrox-handled semi-flex boning knife

Ocena
0 / 5
Polubienia
17
Pobrania
225
Wydruki
0
Wyświetlenia
1105
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle.

If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going 0.15mm to make the logo a little cleaner. To fit on a Prusa Mini, just rotate 45°, or 22.5° for multiple. I've used PLA so far and it's worked great.

Warning: I haven't tested these for more than a few days, so I don't know if after time the blade would cut through. Use at your own risk, unsheath with the blade's edge pointed away from your hand. 

 

https://www.tinkercad.com/things/4peKAvPgQBG-victorinox-6-semi-flex-boning-knife-sheath

Tagi