1 / 3
Sheath for Victorinox 6" Fibrox Semi-flex Boning Knife — image 1
1 / 3

Sheath for Victorinox 6" Fibrox Semi-flex Boning Knife

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A sheath for a Victorinox Fibrox-handled semi-flex boning knife

Rating
5 / 5
Likes
17
Downloads
227
Makes
0
Views
1,127
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

Designed to fit a Victorinox boning knife, model number 5.6603.15 with the Fibrox black handle.

If you want the TinkerCad link, let me know. Prints with the flat side down, no supports. 0.2mm layer height works fine, but I ended up going 0.15mm to make the logo a little cleaner. To fit on a Prusa Mini, just rotate 45°, or 22.5° for multiple. I've used PLA so far and it's worked great.

Warning: I haven't tested these for more than a few days, so I don't know if after time the blade would cut through. Use at your own risk, unsheath with the blade's edge pointed away from your hand. 

 

https://www.tinkercad.com/things/4peKAvPgQBG-victorinox-6-semi-flex-boning-knife-sheath

Tags