Rubbermaid dry box filament mounting base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rubbermaid dry box filament mounting base
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 1452
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a filament mounting base to fit inside a “Rubbermaid 21 cups Clear Food Storage Container” dry box. The design allows for desiccant to be poured in the container and be easily monitored, removed, and/or replaced. The mounting base was designed to fit a Prusa spool holder. I remixed the “Mini rail spoolholder” to better fit in the box, while accepting a standard Prusa filament spool and smaller spools. I included a hole so one can easily mount the spoolholder to the mounting base.
You can find the Rubbermaid Container by searching for:
- Rubbermaid 21 cups Clear Food Storage Container
The “MINI-rail-spoolholder.stl” that I modified can be found here:
The mounting base will print in just over 2 hours on a Prusa MK3+ at 0.30mm Draft using PLA and about 1 hour 20 min on an Prusa MK4 with IS enabled 0.20mm Speed using PLA.
This item will not fit on a Prusa Mini bed.
If you find this item useful, please consider making a donation of any amount the Phelan McDermid Syndrome Foundation (PMSF) under AudienceOfOne:
Thanks, AudienceOfOne