Rubbermaid dry box filament mounting base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rubbermaid dry box filament mounting base
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 109
- Makes
- 1
- Views
- 1,455
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a filament mounting base to fit inside a “Rubbermaid 21 cups Clear Food Storage Container” dry box. The design allows for desiccant to be poured in the container and be easily monitored, removed, and/or replaced. The mounting base was designed to fit a Prusa spool holder. I remixed the “Mini rail spoolholder” to better fit in the box, while accepting a standard Prusa filament spool and smaller spools. I included a hole so one can easily mount the spoolholder to the mounting base.
You can find the Rubbermaid Container by searching for:
- Rubbermaid 21 cups Clear Food Storage Container
The “MINI-rail-spoolholder.stl” that I modified can be found here:
The mounting base will print in just over 2 hours on a Prusa MK3+ at 0.30mm Draft using PLA and about 1 hour 20 min on an Prusa MK4 with IS enabled 0.20mm Speed using PLA.
This item will not fit on a Prusa Mini bed.
If you find this item useful, please consider making a donation of any amount the Phelan McDermid Syndrome Foundation (PMSF) under AudienceOfOne:
Thanks, AudienceOfOne