Bridge Calibration Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small tower to help you dial in bridgeflow and bridgingspeed for your profile.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 566
- Wydruki
- 1
- Wyświetlenia
- 2619
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
I made this to easier calibrate my bridging parameters.
Prerequisites: Filament and print settings must otherwise be calibrated and in good condition.
Fanspeed is not taken into account here as it's filament specific. So you'll have to find a value you're good with before you test different speeds/flow settings.
How i did it:
Print one with just different speeds and the standard 0.95 flow to see if speed made much of a difference. One looked slightly better, so I used that speed for the next test.
Next i printed one with lower and lower flow. It might be a good idea to have the smallest flow on the bottom and the highest one on the top, since it's gonna pull quite hard as it cools.
PS: Text and test is still work in progress. Comment if you have any suggestions.