Bridge Calibration Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small tower to help you dial in bridgeflow and bridgingspeed for your profile.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 566
- Makes
- 1
- Views
- 2,619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
I made this to easier calibrate my bridging parameters.
Prerequisites: Filament and print settings must otherwise be calibrated and in good condition.
Fanspeed is not taken into account here as it's filament specific. So you'll have to find a value you're good with before you test different speeds/flow settings.
How i did it:
Print one with just different speeds and the standard 0.95 flow to see if speed made much of a difference. One looked slightly better, so I used that speed for the next test.
Next i printed one with lower and lower flow. It might be a good idea to have the smallest flow on the bottom and the highest one on the top, since it's gonna pull quite hard as it cools.
PS: Text and test is still work in progress. Comment if you have any suggestions.