Galaxy Watch Charging Stand (medium height remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Avise's Galaxy Watch Charging Stand remixed for medium height, wider base, and tighter cord grip.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 400
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Avise's Galaxy Watch5 Charging Stand With Removal Hole to medium height, with a longer base, and tighter cord grip. The height is in between the original and the tall model, with the highest point being 120mm.
Differences of the remix compared to the original
- Modified the height to be between the original and the original-tall versions.
- Made the cord channel 1mm deeper and added a lip to hold the cord tighter
- Extended the base by 6mm forward and back to add some stability.
- Included right and left hand cord versions
I am using it with a Galaxy Watch 6 44mm, but it will fit any that Avise's original 30mm charging puck models fit. (I have not made a 33mm puck version.)
Right and Left side cord
I noticed that someone had remixed the original to put the cord on the right, so I am including a right hand version of my remix as well.
Base infill
In addition to the longer base, I was planning to selectively print the base with 100% infill, but have found that my default 15% infill is not as unstable as it feels due to the light weight. The attached petg gcode is using 15% throughout.