4040 Aluminum Extrusion Corner Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a corner bracket for aluminum extrusion that works well with M6 nuts and bolts without washers.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 362
- Wydruki
- 0
- Wyświetlenia
- 1100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a corner bracket for aluminum extrusion that works well with M6 nuts and bolts without washers. 4 screws are often not necessary, 2 will work fine. Ive had success with PLA, but depending on the application you may want to consider PETG or ABS.
It's based off a design I've seen elsewhere on the internet (maybe Thingiverse?) but I could not find the model recently despite much searching. Decided to recreate it in Fusion 360, and it printed out well!
It does not require supports, though depending on your printer and filament type you may want to use a brim. When printing, print with the long edge (hypotenuse) facing the bed. This avoids the need for supports.