1 / 2
Kingroon KP3S Pro S1 Y-axis dual rail bed holder — zdjęcie 1
1 / 2

Kingroon KP3S Pro S1 Y-axis dual rail bed holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lightweight and flat bed holder for Kingroon KP3S PRO S1 Y-axis dual rail

Ocena
5 / 5
Polubienia
25
Pobrania
90
Wydruki
0
Wyświetlenia
1029
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A lightweight and level bed holder, for those who are constantly tired of adjusting the height of the first layer. My original table holder was crooked and when adjusting one side, the other side changed height significantly.

My printing preferences :

Material - PETG, ABS

Nozzle - 0.4mm

Layer height - 0.2

Perimetrs - 6 and more

Infill - 60% and more

 

Important! The original GT-2 belt will be short! You need to change the belt to a length of 620-630mm (original 580mm). 

Link to belt : 

https://www.aliexpress.com/item/32924078183.html?spm=a2g0o.store_pc_groupList.8148356.69.4b0140610cZ3RZ&pdp_npi=3%40dis%21EUR%21%E2%82%AC%206%2C75%21%E2%82%AC%205%2C94%21%E2%82%AC%205%2C94%21%21%21%21%40211b88ef16973617531466528e8985%2166161272087%21sh%21LV%210

To connect the belt and I used this GT2 Belt Clamp : 

https://www.printables.com/model/203336-gt2-belt-clamp

Happy printing!

 

Tagi