Tire/Axle Repair for PIP Fire Truck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tire separated with "repair strip"
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My daughter destroyed 1 of the axles because she dropped the fire truck. While I wanted to repair it, I dropped the truck again and destroyed the other 2 axles. What a genius.
So I separated the axle in PrusaSlicer and drawed a small repair strip which you can glue on the bottom of the model to hold the axles in place. I printed the axles in Prusament PETG and the strip in Polymaker Polyterra PLA.
Maybe you have to grind/cut some parts of the model away to “click” the axle back in place and to glue the strip.
It's just a quick and dirty fix, so you don't have to reprint the whole model.
My Print Instructions/Settings
Maybe consider using a brim.