Tire/Axle Repair for PIP Fire Truck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tire separated with "repair strip"
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 34
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My daughter destroyed 1 of the axles because she dropped the fire truck. While I wanted to repair it, I dropped the truck again and destroyed the other 2 axles. What a genius.
So I separated the axle in PrusaSlicer and drawed a small repair strip which you can glue on the bottom of the model to hold the axles in place. I printed the axles in Prusament PETG and the strip in Polymaker Polyterra PLA.
Maybe you have to grind/cut some parts of the model away to “click” the axle back in place and to glue the strip.
It's just a quick and dirty fix, so you don't have to reprint the whole model.
My Print Instructions/Settings
Maybe consider using a brim.