30 mm height Stanford Bunny Voronoï - for retractation test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stanford Bunny Voronoï (30 mm height), used for testing new filaments and fine tuning extruder retraction parameters.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 277
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Stanford Bunny Voronoï (30 mm height), used for testing new filaments and fine tuning extruder retraction parameters.
Story of the origin of the Stanford Bunny model:
https://en.wikipedia.org/wiki/Stanford_bunny
https://www.cc.gatech.edu/~turk/bunny/bunny.html
http://graphics.stanford.edu/data/3Dscanrep/#bunny
Original Standford bunny file transformed with Meshmixer (Step 1 : Select the all part then "Edit", "Reduce" between 80-90%"; Step 2 : Then "Edit", "Make a Pattern", Pattern Type = “Dual Edges”)
For printing it : layer 0.1 or 0.2 mm, no raft, no brim, no skirt, no support