Paper Towel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple paper towel holder which can be mounted using double-sided tape.
- Ocena
- 4,75 / 5
- Polubienia
- 106
- Pobrania
- 973
- Wydruki
- 11
- Wyświetlenia
- 4130
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Paper Towel holder
You need to print two screws and two holders.
Printed with the attached .gcode with PLA and it works nicely, although I had to screw and unscrew the screw multiple times to clean the threads.
I have included .f3d file as well, however it's a mess. :D
Important:
As some people mentioned in the comments, you may have a problem with the screw as it won't fit.
When I modeled the parts I didn't account for thread tolerances, however I was able to put the parts together without scaling anything down using the provided .gcode and original Prusament PLA.
As people mentioned you may need to scale the X and Y axis down to 97-99%.