Charlie HueForge painting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Painting based on a picture of SteveBuilds and Charlie that was posted to his YouTube community page.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
HueForge painting based on a picture of SteveBuilds and Charlie that was posted to his YouTube community page after Charlie passed away. Any black should work for the base layer, I actually used Polymaker Jet Black ASA. It took quite a while to do the initial slicing on my i7-12700k with 64GB of RAM - be patient!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
ABS PolyLite Black Transmission Distance: 0.3
ABS PolyLite Galaxy Dark Grey Transmission Distance: 0.5
ABS PolyLite Galaxy Orange Transmission Distance: 3
ABS PolyLite White Transmission Distance: 4.5
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Galaxy Dark Grey
At layer #11 (0.96mm) swap to Galaxy Orange
At layer #14 (1.2mm) swap to White for the rest.