Charlie HueForge painting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Painting based on a picture of SteveBuilds and Charlie that was posted to his YouTube community page.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HueForge painting based on a picture of SteveBuilds and Charlie that was posted to his YouTube community page after Charlie passed away. Any black should work for the base layer, I actually used Polymaker Jet Black ASA. It took quite a while to do the initial slicing on my i7-12700k with 64GB of RAM - be patient!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
ABS PolyLite Black Transmission Distance: 0.3
ABS PolyLite Galaxy Dark Grey Transmission Distance: 0.5
ABS PolyLite Galaxy Orange Transmission Distance: 3
ABS PolyLite White Transmission Distance: 4.5
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Galaxy Dark Grey
At layer #11 (0.96mm) swap to Galaxy Orange
At layer #14 (1.2mm) swap to White for the rest.