Articulating Flexi Fidget Tap Dancing Drama Robot

This articulating flexi fidget tap dancing drama robot (named after Fred Astaire) is best printed at 140% scale for optimal bed adhesion. 

Fred will still articulate at 100% scale, but I found bed adhesion to be a problem without brims.

The print file provided was sliced using my Elegoo Neptune 4 Pro profile in Orca Slicer with the following notable settings:

Speed:

• First layer: 60mm/s

• Outer wall: 80mm/s

• Inner wall: 100mm/s

• Sparse infill: 150mm/s

• Internal solid infill: 150mm/s

• Top surface: 80mm/s

• Gap infill: 80mm/s

• Support: 60mm/s

• Support interface: 60mm/s

• Travel: 300mm/s

Support:

• Type: normal(auto)

• Threshold angle: 60

• First layer density: 10%

• First layer expansion: 0mm

• On build plate only: true

• Top Z distance: 0.12mm

• Base pattern spacing: 4mm

• Top interface layers: 3

• Base pattern/Interface pattern: Rectilinear

• Top interface spacing: 0.2mm

• Don't support bridges: true

Temperature:

• Nozzle: 210

• Bed: 60

For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.

Feel free to join my discord for additional support, questions, or suggestions!