Filter Carrier for Sennheiser SoundProtex
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small sheet to manage and not lose the tiny filters that come with the Sennheiser SoundProtex hearing protection.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
About
The Sennheiser SoundProtex Plus has many filters for many situations in life. But the case that comes with them is just a little baggie with a zipper and no way to fix or manage the 6+2 tiny filters. A bit silly for 70 bucks of hearing protection
This is a small print that fits inside the baggie, basically just a sheet of TPU with 6 Holes, as the two other filters are with the eartips in use or storage.
Settings
Printed using Prusa i3 MK3S on the textured spring steel sheet with extrudr Flex Semisoft (85A) Transparent with these settings:
Layer Height: 0.2mm
Infill: Not relevant as the Top and Bottom Layers are more than the entire thickness of the part.
There is an official Prusa profile for the material used, but i used an older one adapted on DAS FILAMENT TPU, which uses 2mm retracts.
Material with a shore hardness of 95A likely works as well but i haven't tried it.
License
Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
- Free to modify and republish with credits and the same license
- Applies to photos as well (excluding the cutout from the manual that explains what the filters do)
- Optional: If this was of use to you or if you made something based on it please tell me about it!