Liczymy pasujące modele…
A friend asked me if I could design an earplugs case for her custom made concert/party ear protection earplugs. She has difficulty recognizing left from right of her custom earplugs in a dark club or venue, so something with separate…
This case is designed to securely hold a pair of loop earplugs as well as four "mute" accessories. It's primary closure is via two pairs of 8x2mm circular magnets, but I don't trust them on their own so I designed in a tab detent as well.…
I wasn't happy with the original case that came with my loops. Too much empty space inside. When the elastic keychain holder broke, I went looking for other designs on the internet. I found them all too large, so I made my own. There are…
Gridfinity 1x1 bin for Eargasm earplug case with storage for extra tips. Including v1 model without ear tip storage in case not needed. Tight squeeze for all to fit into 1x1 bin but works nonetheless.
A simple hold for case of loop earplugs (old case, new(and bigger) one fits but not as nicely). Requires an insert. Attached freecad file.
Simple case for basic foam ear plugs without thread. Inner dimensions are 22 mm diameter and height is 28 mm. Printed from PLA, layer height set to 0,08 mm.
Use this box for storing your Loops accessories in a sturdy lockable box. Be careful when assembling. The locking slider fits only one way. The arrow on the sliding knob must be at the bottom. Put the slider in place and then put the…
A friend asked me if I could design an earplugs case for her custom made concert/party ear protection earplugs. She has difficulty recognizing left from right of her custom earplugs in a dark club or venue, so something with separate…
This is a case for the Sennheiser SoundProtex Plus earplugs, with space for the included filters. I printed in PLA without any supports. It's an easy print. The “silence” sign is imprinted in Prusa Slicer and included in the downloaded 3mf.
My Loop earplugs didnt include mutes, so Im glad I found below model to print my mutes https://www.printables.com/model/663873-loop-earplug-mutes Then I found the mute holder attachment for the original case with orgininal mutes. I…
A holder for the loops earplugs box 3 units wide Print without support on a quality profile of your choice!
Printing Parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Seam Position: rear Tips and Tricks: Add a tiny amount of lubricant to threads (e.g. Vaseline) Related Models: Outdoor Container / Pill Box Outdoor Salt and…
Handy durable container for your earplugs. Dimensions of storage space: Length: 62 mm Width: 16 mm Depth: 16 mm
These printable reusable earplugs are designed for noise reduction, water proofing and portability. Each earplug features a slim central stem with two flexible sealing rings that conform to the ear canal. The design is only suitable for…
This complete set includes a pair of printable reusable earplugs and a compact keychain case to store them safely on the go. The earplugs feature a slim stem with two soft sealing rings for a comfortable and snug fit in the ear canal.…
Print Settings: Print the inside vertically with the thread facing down. Print the outside with the opening facing up. Filament Elegoo PLA Plus Wall Layers 2 Layerheight 0.2mm Supports Yes (Tree)
Small but useful case for 3M classic earplugs. Two versions with different tolerances. Thight tolerances worked fine on my Bambulab X1 Carbon with .4 nozzle and .16 layer height. Requires 2 3x6 magnets. Magnets are pressfit, but can also…
Did not like available loop gridfinity containers. Made my own. 1x1x6u total size 1x1x3u stand for Loop earplugs 1x1x3u hidden compartment (for accessories ) magnets possible Enjoy and feel free to remix
Protective cover for earplugs. For easy transport, storage and as protection against dirt or loss. The cover has a putty for attachment. Just insert the pin into the lid and then into the cover.
These earplugs were the only model of earplugs that in my whole life fit my ears without falling out or feeling like hell. You can find them at Homedepot and they are worth the money. I mainly use them when riding my motorcycle, and…
Attach an AirTag to your Loop Earplugs case! Replaces your AirTag's battery cover to save on space. Print Settings Printed in standard PLA ( not recommended) 2 walls 3-4 top and bottom shell layers 0.2mm layer height 10-15% infill No…
Dimensions: 54 x 30 x 16 mm It snaps into each other Max layer height 0.2 Close it with handles near each other :^)
Loop earplugs, compatible with most earplug tips. Modeled after Loops
This case is designed to securely hold a pair of loop earplugs as well as four "mute" accessories. It's primary closure is via two pairs of 8x2mm circular magnets, but I don't trust them on their own so I designed in a tab detent as well.…
Turns out my screw-top version can come apart without me noticing. Who knew? So I make a version with magnets. This takes two (2) 5mmX2mm magnets. You will need to pause the print for the outer case right before the layer that prints over…
added name tags for loop earplugs: Experience engage quiet also included blank versions that text can be added to in slicers Installation Insert the bottom prong of the Y-shaped attachment into the two slots at the hinge of the Loop…
A dedicated 1x1 Gridfinity bin sized for Eargasm earplugs, with a matching insert for a spare pair of foam tips. Features Fits 1x Eargasm earplugs case Insert holds a spare pair of replacement foam tips Standard Gridfinity 1x1 footprint…
An earplug with a hollow core torus that leads to the earpiece. There are little slits on the outside of the torus that allow sound through. dampening but not blocking it completely. Great to make white noise sounds like AC units and…
Box for storing earplugs About the model It's a bit overengineered box for storing 8 pairs of earplugs in hopefully aesthetically pleasing way. There are 8 magnets to keep the sides toghether - 4 on each side, but of course you odn't have…
This is a simple earplugs case for travelling or just for storage. It prints in place without the need for supports or other mechanical operations after printing. It might close and open a bit harder at the beginning, but after a few…
This is a print in place earplugs case. I like to use earplugs specially when travelling and I couldn't find a suitable earplugs container, therefore I designed one. It does not need any supports or other operations after printing. It…
Designed to be used for the earplugs Alpine Motosafe that can be inserted on the keys of the motorcycle. It will work on other earplugs as long as they are about the same size. Category: Sport & Outdoors
A remix of the very nice model iPlug by KMS by KERLE MAKERSPACE optimized for uvex x-fit earplugs For the joint you need a 15 mm long piece of 1,75 mm filament. Changes to original model -shortend by 5,7 mm -changed ratio between lid and…
INTRO Remix of a model iPlug by KMS by KERLE MAKERSPACE . Incorporate Torus shape onto the lid so that we can hook a keyring. PRINT INSTRUSTIONS No support is needed. ASSEMBLY To assemble the joint 1.75mm filament is required.
Check out the new screw-top version! https://www.printables.com/model/844317-loop-earplugs-screw-top-lid-case – Original – Remixed jecoffey's awesome design, made it a little thinner and a little shorter, removed the loop and put holes in…
Remix of Earplugs case with keyring holes by Qrd Original model: iPlug by KMS by KERLE MAKERSPACE . adapted for acoustic earplugs to be able to take them to festivals or concerts. PRINT INSTRUSTIONS No support is needed. ASSEMBLY To…
A barrel adapter to shoot foam earplugs out of a hero covert dart gun from five below to use open the blaster and separate the barrel from the piston and remove all the air restriction internals pictured above
eBay user grant_gibson123 is illegally selling this model. This model is licensed for noncommercial use only. Update 15/09/2023: Removed the square keychain version - questionable integrity, don't want anyone losing their loops. Added…
Another HSW-as-a-nightstand holder. Fits your favourite set of earplugs, one pack of tissues and a nasal-spray. Use the Fusion-file to adjust hole-dimensions, if needed.
Greetings all! This is a set of sensory/noise reduction earplugs for individuals who are looking for a little bit of noise reduction for everyday activities, like going to the movies, being in a loud restaurant, and much more. These are a…
this is my first time modeling first and foremost earplugs holders so you don't lose them
The Loop Earbud Carry Case with Mute Storage is a compact accessory designed to keep your earbuds safe and organized. It features a unique lid that securely holds Mute rings while protecting your earbuds from damage and dust.
Skadis Holder for the Ear Plugs Case from @KERLEMAKERSPACE / @__sh
After my old design came loose in the car, I made a screw-top version so that wouldn't happen again. Works with the OG Loops as well my Engages with the Mutes in. Should work for Experience, etc. PETG is almost a necessity. It works much…
Update March 1st 2024: I made the box slightly smaller by including the space underneath the hinge in the inner volume. The box dimensions are 46mm x 22mm x 37mm (42mm with latch). I recently bought new earplugs for band rehearsal and…
I made case for earplugs inspired by Alpinehearingprotection. The Parts should be printed with hinges close together. I haven't printed it yet.
This is a tiny, 2-piece adapter that is meant to pop into the middle of your Loop Earplugs and allow you to insert a walkie-talkie/radio earpiece. Most earpieces on Amazon come with an isolating tip as an option for dampening noise in…
Prints nicely without supports. Room for magnets in the base. Mine are printed with 0.2 layer height and 10% infill. Basically do as you normally do, and it should be fine. The 1x1 holder pairs nicely with…
About An attachment that holds Loop Mute rubber inserts, compatible with original Loop Earplugs case. I have always wanted a way of carrying the Mute rubber inserts to further reduce noise when needed, so I designed this attachment that…
Earplugs case for party plugs for safe storage at concerts
Simple holder for EARPEACE earplugs in their case.
