SNES LCD Screen Housing/Shell (US NTSC version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
housing to fit the 4" (widescreen) AliExpress LCD board for the SNES - this is for the US NTSC variant
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 780
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Shell for the 4" (widescreen) AliExpress SNES LCD Screen, specifically to fit the US NTSC version of the SNES
PAL/SFC version can be found here
Printing
I printed both parts in 0.3mm layer height, and supports on build plate only.
The images used aren't the best prints I've ever done, but good enough for a prototype and to be able to share the files knowing it will fit!
I also recommend using some black tape to mask off the metal edges of the screen, just to make less glaring when using it :)
Assembly
For this build to fit in the console, you'll have to remove the front PCB and screws/stands.
The shells then clamp around the bottom PCB and screen/speakers, and are fastened using 4x M3x10mm hex screws.