SNES LCD Screen Housing/Shell (US NTSC version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
housing to fit the 4" (widescreen) AliExpress LCD board for the SNES - this is for the US NTSC variant
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 69
- Makes
- 0
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is a Shell for the 4" (widescreen) AliExpress SNES LCD Screen, specifically to fit the US NTSC version of the SNES
PAL/SFC version can be found here
Printing
I printed both parts in 0.3mm layer height, and supports on build plate only.
The images used aren't the best prints I've ever done, but good enough for a prototype and to be able to share the files knowing it will fit!
I also recommend using some black tape to mask off the metal edges of the screen, just to make less glaring when using it :)
Assembly
For this build to fit in the console, you'll have to remove the front PCB and screws/stands.
The shells then clamp around the bottom PCB and screen/speakers, and are fastened using 4x M3x10mm hex screws.