Wall Plate Models for pranks or scale models
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model rocker light switch (non-moving), North American electrical outlet, and wall plate blank.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
I've created the light switch and power outlet to print at 1:6 scale for my miniature arcade, but have since realized that some fun could be had printing these at full scale and sticking them to the wall in various places. I've also included a blank plate (with faux mounting screw heads) for remixing to recreate other types of switches and outlets.
Some detail may be lost at 1:6 scale unless you minimize layer height (after the first layer) and line width as much as you can, but they do print fine at 1:4 scale and up. Pictured are full scale, 1:5 scale, and 1:6 scale prints.
For best effect, if you have a multi-filament printer, I would recommend printing the bottom of the outlet holes and side grooves in black.