1 / 2
Ender 3 Pro ADXL345 CR Touch Mount (Adafruit Version) — zdjęcie 1
1 / 2

Ender 3 Pro ADXL345 CR Touch Mount (Adafruit Version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified stls to mount Adafruit Adxl345 having different dimensions ***X-axis Limit Switch Lever Arm Needs Adjustment***

Ocena
0 / 5
Polubienia
3
Pobrania
63
Wydruki
0
Wyświetlenia
421
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Print Parameters

0.2mm Layer Height
100% infill
External to Internal Ordering on Perimeters (more accurate hole sizing)
Brim

Hardware

M2.5 SHCS  - qty (2)
M2.5 Brass Threaded Inserts - qty (2)

 

***I put a slight bend in the X-axis mechanical limit switch lever arm.  This needed to be adjusted because the mount extends a little bit further out from the tool head which would cause a collision with X axis stepper motor cover.  You can see this in the cover picture if you look closely.  I used needle nose pliers to slightly bend the lever arm outwards so the toolhead would trigger the switch with enough clearance to the mount.  I moved the toolhead back and forth manually (motors off) to find the trigger point and the clearance I wanted***

Tagi