1 / 2
Ender 3 Pro ADXL345 CR Touch Mount (Adafruit Version) — image 1
1 / 2

Ender 3 Pro ADXL345 CR Touch Mount (Adafruit Version)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified stls to mount Adafruit Adxl345 having different dimensions ***X-axis Limit Switch Lever Arm Needs Adjustment***

Rating
0 / 5
Likes
3
Downloads
63
Makes
0
Views
421
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Print Parameters

0.2mm Layer Height
100% infill
External to Internal Ordering on Perimeters (more accurate hole sizing)
Brim

Hardware

M2.5 SHCS  - qty (2)
M2.5 Brass Threaded Inserts - qty (2)

 

***I put a slight bend in the X-axis mechanical limit switch lever arm.  This needed to be adjusted because the mount extends a little bit further out from the tool head which would cause a collision with X axis stepper motor cover.  You can see this in the cover picture if you look closely.  I used needle nose pliers to slightly bend the lever arm outwards so the toolhead would trigger the switch with enough clearance to the mount.  I moved the toolhead back and forth manually (motors off) to find the trigger point and the clearance I wanted***

Tags