Nail Polish Shelf/Rack/Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nail polish shelf. Can hold up to 40 Holo Taco bottles.
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 352
- Wydruki
- 0
- Wyświetlenia
- 1513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I got annoyed having my nail polishes sticking up out of my boxes every which way and designed a shelf. It's pretty straightforward; you print on its side and can change the height which will change its width once you have it standing in its correct orientation.
I use a Bambu P1P so I didn't need a brim, but depending on your print speed/printer you might. In my pics I used Hatchbox's Metallic Finish PLA, so I used Bambu's preset PLA settings but slowed outer wall speed to 100mm/s instead of 200mm/s and left everything else the same. Took about 10 hours to print. Uses around 370 grams of filament at full size.