GSPRO w/ single press mulligan version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
taking off heat map so I can add green grid which allows me to have a 1 button mulligan.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here it is the box with one push button mulligan, I had to remove the Heat map as it shared a common point with CTRL so i could not link them together. with this version i am able to create a board that is 1 touch mulligan as the mulligan button hits M and CTRL at the same time.
Again i am printing on an SVO4 with a .6 MM nozzle for the main box and .4 for the words. layer Hight is .20 or .22 work good.
3 line wall Thickness 3 top and bottom layers. I specifically Designed the Dimensions of this box to print in that configuration so it just prints lines and has no infill weird jerky printing in the walls and supports.
i print this in Esun PLA plus.
for people that do not have a Large IDEX printer but have a printer that is big enough to print this. Skip the words and slice it. once you have sliced it find out at what layer the print gets fully skinned over, and change your filament color right before that happens let it print another few layer and change back to main color. This will give you the same result except you will need to baby sit your printer.
I will add the instruction in for changing over your PCB you get for the new box as i will use up the stock of PCBs i have before i order a new PCB with the new connections. website to get the inside parts if you chose to buy the parts from me.
https://www.bacustomproducts.com/
how to video ( I will also update and create a new video and link that one as well in the coming weeks)