1 / 2
Femto (Griffith)  from Berserk - HueForge — zdjęcie 1
1 / 2

Femto (Griffith) from Berserk - HueForge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Femto from Berserk - HueForge

Ocena
5 / 5
Polubienia
20
Pobrania
92
Wydruki
2
Wyświetlenia
1746
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Fossil Grey
At layer #10 (0.88mm) swap to Cotton White for the rest.
 

Tagi