Brakes for IKEA FLISAT toy storage with wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brakes for the IKEA FLISAT toy box, to make the wheels turn slower and thus safer for toddlers learning to walk.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
The FLISAT box is good for both storage and learning to walk, but as the wheels roll too fast it's dangerous to leave alone with a toddler leaning on it. With these brakes you can adjust the braking power and let the wheels roll as much or little as you want.
BOM:
4x rubber furniture feet, 19mm
4x M5 screws, at least 50 mm long
12x M5 nyloc nuts. 8 of these can be normal nuts, but might need loctite to prevent slipping.
Instructions:
Print with a pause to add a nyloc nut inside. Assemble like in the pictures. You might want to test the tolerances on your printer and adjust the XY-compensation in the slicer as needed.