1 / 3
Family Passport Case/Holder with ID slot and AirTag — zdjęcie 1
1 / 3

Family Passport Case/Holder with ID slot and AirTag

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimalist Passport Holder with a click-in-place AirTag slot and a place to store your ID

Ocena
0 / 5
Polubienia
15
Pobrania
138
Wydruki
0
Wyświetlenia
794
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As a family, it becomes pretty hard to keep track of all passports when travelling, and becomes a source of anxiety as well thinking of losing a passport.

I created this case to fit all the passports in the family in one neat case. It has a slot for an ID card (intended for card based identity documents), and a place for an AirTag where it just clicks firmly into place (took many iterations to get it right). This is a very slim form factor design and I found it very useful on our last trip.

I have added a version with 10mm space for 2 passports, 15 for 3, 20 for 4, and 25 for 5 passports. The less the thickness is, the more dexterity you will need to shimmy the AirTag into the slot. These numbers are just a good guess, but if you find those to be much too off, just leave a message with the thickness, and I will try to accommodate the request. Note: I have only used the 25mm model, and haven't tested the other sizes.

Print with supports for the AirTag slot - I used tree supports (only touching build plate). 
Cheers, and happy travels. 

Tagi