Family Passport Case/Holder with ID slot and AirTag
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist Passport Holder with a click-in-place AirTag slot and a place to store your ID
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 138
- Makes
- 0
- Views
- 794
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As a family, it becomes pretty hard to keep track of all passports when travelling, and becomes a source of anxiety as well thinking of losing a passport.
I created this case to fit all the passports in the family in one neat case. It has a slot for an ID card (intended for card based identity documents), and a place for an AirTag where it just clicks firmly into place (took many iterations to get it right). This is a very slim form factor design and I found it very useful on our last trip.
I have added a version with 10mm space for 2 passports, 15 for 3, 20 for 4, and 25 for 5 passports. The less the thickness is, the more dexterity you will need to shimmy the AirTag into the slot. These numbers are just a good guess, but if you find those to be much too off, just leave a message with the thickness, and I will try to accommodate the request. Note: I have only used the 25mm model, and haven't tested the other sizes.
Print with supports for the AirTag slot - I used tree supports (only touching build plate).
Cheers, and happy travels.