1 / 4
case for Dual USB Charger from Bastelgarage — zdjęcie 1
1 / 4

case for Dual USB Charger from Bastelgarage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

case for Dual USB Charger from Bastelgarage https://www.bastelgarage.ch/5v-3a-lm2596-dual-dc-dc-step-down-mit-usb

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

You need only 3 small screws to hold everything together. The small rings are for the backside of the module, the 3 big one are used on top. The screws should connect from the back side to the top. It helps to glue the rings to  the bottom and top plates.

Tagi