1 / 1
Demon claw handles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Claw-shaped handles with few different mounting options, including snap-on option for Voron V2/Trident doors.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 1025
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (59)Powiązane
This project includes ‘demon claw’ door handles with various mounting options. It is a remix of the Claws Bookmark model by guillermytho.
Mounting options include:
- claw-handle-flat: Simple flat base, you can glue it to the door or use a VHB tape.
- claw-handle-voron: Slide directly onto Voron door handles (and easily removed), see the picture.
- claw-handle-heat-inset: Uses two M3 heat-set inserts, 40 mm from each other.
Following models are included for remixers that would want to add their own mounting options (or mount different models to the Voron doors):
- claw-handle-with-cutout: Handle with a 28 mm by 8 mm cutout in the base; insert your own mounting option there.
- voron-door-handle-wrapper: Slide-on mount for Voron door handles; add your own model to it.
Printing instructions:
0.4 - 0.6 mm nozzle, 0.15 - 0.2 mm layers, 2 - 3 walls, 20 - 40% infill
Use supports! (recommended: Support on build plate only, Overhang threshold = 40)