1 / 9
Holder for 1/2 AA to CR2032 Adapter for Apple Macintosh — zdjęcie 1
1 / 9

Holder for 1/2 AA to CR2032 Adapter for Apple Macintosh

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a holder to secure in place the CR2032 Adapter you can find sometimes to fit a CR2032 battery instead of a 1/2AA

Ocena
5 / 5
Polubienia
16
Pobrania
90
Wydruki
0
Wyświetlenia
898
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model fit best my take on the original Meow Toast adapter for ½ AA adapter to CR2032. If you want to reproduce the PCB itself you would need to manufacture it over a PCB Manufacturer such as PCB Way (Not that hard).

The PCB Gerber are also attached and can be used freely. If you assemble it yourself I recommend the CR2032 metal holder from Mouser:

BAT-HLD-001-THM From TE Connectivity (Mouser: https://mou.sr/3Qlr9Ol)

To make the side thicker I always use 2 PCB soldered together, the 3D model has been design with this in mind.

 

 

Tagi