Liczymy pasujące modele…
It's the Torture Toaster! The guys at Edge of Tech challenged me to make a torture test that would be fun and interesting, and this ridiculous thing is where I ended up :) This will test your print tolerances, overhang handling, and most…
Small Toaster to store your Switch Games
Print in place SD card holder. https://www.youtube.com/watch?v=yyMM0uD7uX8 Support : No Raft : No Layer Height : 0.2mm
Diseños de El Grinch con letras de Feliz Navidad - Merry Christmas, mano brindando y otra con una bola de Navidad, 4 colores con 1 AMS. Impreso “boca abajo”. La idea es formar un conjunto con los tres diseños. Obviamente, se pueden poner…
I recommend printing the top and the lever with supports and brim to avoid stringy prints and warping. (My prints were made in PETG.) To assemble the toaster just insert the lever into the top… …and then the bottom onto the rest. Happy…
A toaster tong...what more can I say. PETG is probably the wise move here. But a lot of filaments should work. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 20 Filament: SUNLU PETG Category:…
This is just a replacement knob I had to make for my home. The original one was broken...
Halfway through the print pause your printer and add 1-2 small spit shot weights to make the rattle inside. Once printing complete add three small split rings and two treble hooks. Happy catching!
This toaster holds 4 Nintendo Switch game cartridges. I cut the original model in half to remove some of the storage slots, since I think otherwise it looks comically large. Prints in place with no supports. The filament you see here is…
Serving stand for laying out four hot toasts and tongs for removing hot toast from the toaster. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 15 Filament: SUNLU PLA Category:…
A painted Torture Toaster in 8 colours, ready to test your INDX Core ONE! 1383 changes at 0.2 layer height.
A Festive Fireplace to charge your phone and keep you toasty. Should work with a lot of phones up to 20mm thick. I designed it around my iPhone 13 pro. The back piece slides forward and backwards to hold the phone in place. You can add a…
[EN] Set of heart-shaped cut-outs for making heart-shaped one-dish cakes. PLA is fully sufficient for printing. For hygiene reasons, it would be preferable to always use a new set, however, in case of repeated use, cleaning in the…
This is a replacement knobs for for toaster ovens. both the .25" D-pot and rotary switch knob. all units are in imperial. Category: Household
Print Settings: PETG / PLA / ASA are all not working due to temperature → PA12-CF is working :)! thanks @Rumbledoc for the make! hi, Leider ist die Handgriff-Abdeckung die man entfernen muss um den Klipp des Sandwich Toasters zu…
Cute geometric toaster with simple faceted design, including removable polygonal bread slices for pretend play.
Sliced, buttered and slaped back together, four slice SD card print in place storage toaster. Remixed from SD Card Toaster Print In Place by Dehapro | Download free STL model | Printables.com
This was my first model designed for 3D printing. It is printed several parts glued together with instant glue. It also includes a mechanical part / lever to lift - money - in this case. I plan to redesign the whole model so that it is…
Download my others models here Robot toaster inspired by matt dixon's illustration "Well done". no supports needed Painted files prepared for MMU and AMS. You can also print it in one color and paint it. Remember to set high purge volumes…
Cute Toast Box with 6 different faces to choose. Can print with single extruder. Can scale-up as you want but SCALE-DOWN IS NOT RECOMMENDED. There are 7 stl files in this model. One file is bottom part and the other six files are top part…
A piece of toast, fits with the rest of my breakfast files.
PRINT INSTRUCTIONS / SETTINGS Shown images printed on MK4 Shown images printed in 0.2mm speed setting with input shaper Models tested in PLA (PolyTerra)
Powdered Toast Man. Magically farting on a piece of powdered toast to give it the intended flavor. Otherwise “it was a good as toasted cardboard.” Probably needs a base. add your own.
Der Originaltoaster wurde verbessert, indem die Wanne etwas vergrößert wurde und das Innenteil, das den Hebelmechanismus darstellt, stabiler konstruiert wurde und die seitlichen Stäbe als Halterung für die Drehknöpfe verlängert wurden.…
Airpod charging dock, it operates like a little toaster you will need to purchase some additional parts to assemble. May work with gen 1 Airpod pros based off of the dimensions, but I have not tested it. Print the parts in the following…
He does the toast thing
A small charm with added loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of…
This here is The "Dry-O-Matic" Sponge Toaster. I made this for my kitchen sink for the sponges to dry a bit better. When printing this use supports for the toaster handle but make sure to use support blockers for the drain hole. Make sure…
This is a replacement clip for my sandwich toaster, because the original clip broke. The new clip is much stronger, than the old one. I printed the clip in PLA, because I believe, that the heat will not get to the clip. I will update…
I can't explain how satisfying this is to use. The magnetic pogo pins will suck the card from your hand as it seats into the dock. If your card is turned off, it will wake and begin charging as soon as it sees USB power. If you have…
its a fake toaster for kids to play with in the bath tub
New clip for sandwich toaster. I recommend to print it from some high temperature filament, in my case PA12CF15.
Just a simple Toast design for the "Klein Toaster" from Bosch for the Kids to play. Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: DasFilament PLA Yellow Category: Toys &…
A throwback to the days of Windows 95 and specifically the Flying Toasters screensaver that was included with After Dark. This was my first 3D model so it’s a little rough but it turned out nice. Any feedback is appreciated. Print…
Replacement lever handle for the Cuisinart ‘Custom Select’ toaster, and likely others as well. Printed in PETG without supports. Orient with the front of the handle on the build plate.
Took the general dimensions and facial features from Bierhoff's original and reshaped the body and feet. Added toast slice. To get the toast to fit either scale down the toaster to 80% or scale up the toast to 120%. I printed the toaster…
A toaster handle I made for my Cuisinart toaster since the stock ones broke off. Use an adhesive to attach.
Add a classic breakfast essential to your child’s play kitchen with this 3D printed toy toast bread . Designed in the shape of a simple slice of toast, it’s a fun accessory that pairs perfectly with other toy foods like fried eggs,…
This is a replacement handle I modeld because mine brocke. It is made for the Koenic KTO 4331 M Toaster.
Not my photo of the actual biscuits! Just a cute toast cookie cutter, saw the cookies on pinterest and wanted the cookie cutter, so boom. no special print settings Category: Kitchen & Dining
Emergency! My granddaughter has a toy toaster and lost the toast! Grandma to the rescue with Fusion 360 and my Prusa i3 Mk3S+ ! This toy toast is 60mmx60mm and 10mm thick. It fits the Casdon Junior Cook Morphy Richards Toaster perfectly…
This is a special print for me. It is designed after a woodshop project when I was in middle school. Over 35 years ago. We took a piece of would and used a drill press, bandsaw, and drum sander to make this. In middle school. Used to let…
Toasty the sheep on stilts boss from Spiro Reignited Trilogy. So its a sheep on stilts in a pumpkin outfit. This will be a challenging print.
I printed this out quickly with a 0.8 nozzle. The dowels work for alignment purposes but I had to use hot glue to keep the parts together. The main body warped pretty badly on me at the ends. I'd suggest a substantial brim on the inside…
Recommended to use PETG/ABS, something more thermally resistant than PLA 3+ perimeters for a stronger print Use of a little CA glue to keep them attached works like a charm!
I got a report that the toaster knob in the kitchen broke this morning. It's broken all right. I took a couple of measurements and spun up 3d builder and I think it's pretty close. Fits perfect the first time, even has the taper and the…
A dock for 2 Ugreen power banks as detailed in the video above! Hardware 2 x 25mm M3 screws for eject arm pivots 2 x 12 x 5mm springs (or similar) 2 x 12mm M3 countersunk screws 2 x UGREEN Cables (Ugreen US286) Printing Instructions I…
For an 8x1x16 tang. You might also be interested in the matching dial knob . No supports.
Toaster tongs. Printed in abs. 20% infill. 1 hr 15 min print. Idea is to grab the stuck toast with the tongs, near the middle of the tongs - teeth can be used to retrieve broken pieces.
Rhino Toasterino generated with AI brainrot from: https://en.namu.wiki/w/Italian%20Brainrot/등장%20캐릭터#s-2.30 Image used for generate 3d model added in picture gallery Background of image removed with: Adobe lightroom / You can also use…
Make Valentines day morning special with this customizable Toast Stamp. I have allowed for two lines of text (per slice of bread!) with maximum of six letters per line, and added the ability to adjust the spacing and font each letter.…
Replacement locking clip for the Orava ST-300A toaster! Likely to be compatible with other toaster models. For printing, I recommend using PETG.
To all you grilled cheese sandwich / toast lovers out there! Here is the ‘Keeping it Crispy’ tray holder you never knew you needed. Gone are the days of soggy and moist bread that soaks up steam when placed straight on your plate. This…
Rhino Toasterino – Your Viral Meme Keychain Companion! Discover the hilarious fusion of a cute rhino and a vintage toaster in this trending Italian brainrot-style meme keychain ! Perfect for meme lovers, collectors, and anyone who wants…
its just a keycap with a cute toaster
If you brake one, you can always print one! But use PET-G Full infil, concentric 235C no wents 0.12mm layer height with 0.5mm nozzle and brim 6mm for adhesion. I'm sharing this project only for PERSONAL USE! If you want to sell it, we…
I printed it without support (ribs are not visible) ;-) Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
I saw a video for making Egg Toast Cookies and thought I'd give it a try. But since I didn't have a "Bread" cookie cutter, I designed a simple one. The video I refer to may be found here ... it's a little long (since they show you…
A simple SD card toaster I created from scratch as a challenge for myself. The tolerances are rather loose, so it should be easy to print on most printers.
A play bread/toast slice. Fits my sons play toaster at 2.5"wx2.3"h (62.5mmx68.5mm) and 14mm/0.54in thick.
Disclaimer: This model involves AI-assisted generation and has been manually processed and optimized for 3D printing. The mesh is verified to be watertight and error-free. 💙 Enjoying the Freebies? I love bringing these concepts to life…
This is a set of files, including a toaster with a toast-ejecting mechanism, plus some extras- toast slices, jars suitable for filling with jam, peanut butter or other delicious things and (naturally), some avocado halves. To see how it…
The closing mechanism broke at our Silvercrest toaster. That's why I created a replacement closing mechanism. It's a red part in the pictures. The mechanism is easy to put on and holds in place. Printed with Prusament PETG on Prusa MK3S+…
High uric acid levels can harm kidney function—I’ve personally found that drinking lemon water daily is the most effective way to avoid medication. But slicing lemons is such a hassle (lazy much?), and cutting them crooked while staring…
These simple and fast toast swatches print in under 10 mins and store neat and compact in their accompanying toaster. the shape of the slice makes it super easy to select and grab any slice you like from my one of a kind 20 slot toaster…
Replacement handle for a Russell Hobbs brushed aluminium toaster.
Replacement part when your toaster handle has seen too many ups and downs Print notes STL is oriented correctly. Print standing up Material: I use ABS It does not look like the part is seing a lot of heat from the toaster so other…
Despite my toaster having its own crumb catcher, the task of cleaning crumbs off my kitchen is never-ending. But not anymore!
Tongs for grabbing toast from the toaster. Highly versatile: can also be used to grab bagels, english muffins, pop-tarts, and waffles. Instructions Print. Grab toast. Category: Kitchen & Dining
Hi everyone. I made a toaster lid latch as a replacement for a broken one. It worked for two different toasters (as shown on pictures) so I hope it will work for Yours aswell ;) It is a quick print so if this size does not fit Your…
A small charm with added loop for mounting. A challenging build that requires steady hands for gluing cleanly. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2…
I’ll bet your young engineer could eat a whole “Locomotive” for breakfast or lunch. This stamp works best with white bread. Whole wheat bread needs to be toasted a bit darker for the best effect. Press this stamp into a slice of bread…
Nothing needs supports. I printed everything 15% infill in PLA. I used 2 of these 64GB USB 's. I just took off the plastic shell. Print 2 of each part of the toast.
If this model does not print well turn down your nozzle temp, if that doesn't work level and calibrate flow, and try running a fine layer height.
I use the toaster oven quite a bit, and often swap its pizza stone in and out of it for various uses. I got tired of digging it out from under the big oven every time, so I made a little holder that holds it upright and allows me to tuck…
Držák pro výměnné desky pro toaster Sencor SSM 9940SS. 4 pozice.
You might also be interested in the matching plunger knob .
Toaster Fairy House Give your kitchen counter a tiny dose of magic with this charming Toaster Fairy House — a whimsical little home built from the shape of a classic toaster. Few supports are needed. I used organic-style supports, which…
Complete your child’s play kitchen breakfast set with this 3D printed toy toast topped with a fried egg . Designed to look like a slice of bread with a sunny-side-up egg on top, this playful accessory adds more variety and fun to pretend…
Specs: Material: PETG oder ABS Schichthöhe: 0,2mm Infill: 20% Parameter: 4
Replacement handle for Bifinett KH1204 Customize This thing was made with Tinkercad. Edit it online Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,2 Infill: 10% Category: 3D Printing
POWDERED TOAST MAN - REN AND STIMPY
This little form will help you to create cool hot-dogs based on the toast bread slice. How to make? put the form on a slice press to make folding lines put cheese and sausage or anything you like bake or put in microvawe for about 30s add…
This is a wallet that is slimmer than a MacBook, looks like a toaster, holds 4 cards, and unlike other 3D printed slim wallets, has to option of a cash pocket. You may need to sand the walls of the card containers as it might be a tight…
Toaster clip from prusament PLA, size on the pictur (mm)
Barras Industries is proud to bring you the toast-o-matic 4000 It is the all in one solution for those that need to sort their toast into different grades and transport them from location to location Found to be 500% more effective than…
These toaster tongs should be printed from PETG without supports. Stiffness is optimized for PETG.
I designed this tank for the game Tonks but it could be used for other games, as a toy, or as decor. The pivoting turret is based on a 1950's toaster, and the body and tracks are loosely based on the Sherman tank. Have fun with this silly…
The Model is about 75mm high and in the print mirrored to the picture. For a minitur about +30mm it has to be scaled down
Guten Tag zusammen, die Mutter einer Freundin hat mitbekommen, dass ich jetzt neu seit ein paar Monaten einen 3D Drucker habe, den ich gebraucht auf kleinanzeigen gekauft habe :)! So freut es mich mit diesem “weiter-verwendeten” Drucker…
A piece of bread/slice of toast which can be printed using multiple colors using manual filament swaps at different layers
Leveller remade to add more strength
With this toast press or sandwich engraver (does it have a common name?) you can make your meal a little more interesting. Simply press the motifs onto the sandwich/toast before toasting it and create a height difference that causes the…
Description The 6x4x3 puzzle consists of one frame piece and four identical L-shaped pieces. Fit the 4 L-shaped pieces into the frame to create two different patterns, Hourglass or W-Toast, as shown in the photos. The total printing time…
A small replacement button for a toaster. Print with infill. The diameter of the inner houl is 3 mm. Nob diameter is 34 mm.
10% infill .16 layer height PLA Ender 3 V2 Cura Slicer added filament change at layer height 28 added a slit on the back so you can have it vertical or horizontal
A toaster to hold some SD cards! Recommend printing with .08 layer height with 3 walls, 7 layers top and bottom. my hot end cooling fan blew up when printing this because its a stock crappy one and caused a bad vibration. Have fun!
