Barrina LED Strip Holder for AC Infinity Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for attaching 48" Barrina T8 LED shop light fixture to the frame of an AC Infinity Tent repurposed as enclosure
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D printed mount snaps onto the frame of an AC Infinity CLOUDLAB 632 grow tent placed horizontally and repurposed as a 3D printing enclosure to securely hold a 48” Barrina T8 LED shop light centered over the print area, providing optimal illumination. M3 heat sets allow mounting the Barrina light brackets to the printed part for a sturdy attachment using the brackets supplied by Barrina for wall/ceiling mounting. M3x5 pan head screws are suggested so they don't bottom out the heatsets. The cap head screws in the picture work, but aren't recommended.
The mount snaps onto the frame of the AC Infinity tent and firmly holds the light in place and then the light can be snapped into the mounting bracket. The tight tolerances around the frame keep the light fixture solidly positioned in the desired orientation centered over the print area for optimal illumination.