Liczymy pasujące modele…
I needed a stand to hold one of these light bars and couldn't find one. I modeled this to suit my needs. It prints in two parts and a standard ¼ 20 bolt and nut holds it together. The height is adjustable. I put a few holes in to…
I wanted a way to hang a LED T5 fixture from my drop ceiling. I paired with some drop ceiling track eyelets that I printed.
Just a simple, minimal bracket to hold two Barrina T5 shop lights side by side to be hung from shelving to be used as grow lights for seed starting. I based my design on bracket for this model that is for the T8 shop lights but mine is…
Simple light stand designed to fit Barrina T8 grow lights. Has a hole at the back for a cord Has cutouts to allow for reflectors
Print 3 of the bottom arms, a multiple of 3 of the middle support arms (I used 3), one ring segment, and (optionally) couplers that will help with alignment if you extend the LED lights (for instance if you want to add a 2 foot height…
This is a set of angled mounts for the Barrina T5 grow lights. They are designed to be mounted with #6 drywall anchors, using two of the mounts to mount one light bar. Printed on my X1C in Overture PETG. I printed them on their sides to…
Various sized standoffs for the Barrina T8 branded LED tube lights readily available. The different heights should allow you to bypass any conduits/obstructions in your shop. I recommend to print these in either PETG or ABS as PLA might…
Wife didn't like the tripod the with the T10 growlight. Matched the base dimensions and made a sleeve matching the tube frame height. Added a couple nubs on the bottom to prevent any twisting and help lock it down. Dimensions are built…
These clips are used to attach these barrina lights , https://www.amazon.com/gp/product/B0814LNBHH/ to 16mm poles commonly found in some grow tents. This is done to provide side lighting when the canopy gets dense. Printed in pla, petg…
Base sizes offered: 40mm, 50mm, and 60mm. Let me know if you'd like a specific size added. Filament: PLA Layer Height: 0.2 Orientation: Standing up Supports: none Infill: 15%
The original design was great but I needed a taller stand to be able to reach the top of bigger plants. I also didn't want to have the lights hanging from the ceiling. After some trial and error, I end up with a screw design that can be…
Printed in PETG, these stands have a simple base that has a thumb latch compliant mechanism that enables the arm with the light holder to slide up and down, and lock in place at half inch increments. I printed with 3 shells, 15% infill,…
Remixed the 35mm Barrina T8 mount for the smaller T5 model. Please note: you must slide these mounts on the LED before mounting to a surface.
Simple clip for a barrina grow light that uses 10x3mm magnets to mount onto a metal surface. I used these magnets from amazon (no ref code), and they measured 10mm x 2.65mm actual, so I modeled it with a 10.2x2.7mm hole in the model. With…
Tripod stand for the popular Barrina 1ft T5 LED lights (affiliate link here https://amzn.to/4kfLAJn Unfortunately, my house does not receive much sun so these Barrina lights have been a godsend for my indoor plants. I didn't like the idea…
A simple bracket to easily hang the Barrina T8 lights vertically (with original hardware that comes with the lights) in your grow tent for setups such as aeroponic towers. There are 2 different brackets available to download with the only…
This 3D printed mount snaps onto the frame of an AC Infinity CLOUDLAB 632 grow tent placed horizontally and repurposed as a 3D printing enclosure to securely hold a 48” Barrina T8 LED shop light centered over the print area, providing…
A simple bracket that allows you to use the existing screw and clip provided with the Barrina T8 led lights and point the light down, attaches via a regular drywall/deck screw.
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
I made this stand for the Barrina T8 lights. I got tired of my lights being so easy to knock over on my tower system, so I made these. They actually are really stable and sturdy. These can probably be printed with a low infill and be…
I only made the top part to make it work with T8 Grow Lights. I think the original was made for a T5 but I'm not sure. The PVC makes it so it needs less 3d printed parts and makes it super stable. Plus ¾ PVC is super cheap and can be…
printed out of petg 25% infill with 3 perimeters .15 structural I designed a solution to hold those specific amazon led lights for the hydroponics tower maybe it could work for other lights as well
These two mount brackets hold Barrina T8 light in 60-degree position. Parts are not the seme so check which side goes were. There is 1mm difference and your eye will easily tell you which one is which. Designed to sit slide from sides and…
Barrina makes some great inexpensive plant lights (you find them here on their website , and also on amazon) but their mounting options are mostly designed for "straight down" placement in grow racks. Most of my plants are on high…
These holders clamp right into the Barrina lightbars but are loose enough to allow sliding or repositioning the light bar. I have used these with both Gorilla Glue and with screws and they function very well both in the garage and inside…
This is a set of caps that let you store Barrina LED grow lights in stacks of 2, 4 and 6. They will work for both the 2 and 4-foot models. They go by other names as well. Here's are the lights on Amazon:…
I used @LeeWeaver_1455094 Barrina T8 Plant Grow Light Stand and modified it to fit 2 of the T8 Lights. Lee had an excellent design that worked very well but I needed to hold more than one light and I had a really tight fit with the base…
The LED hood that came on my aerogarden has failed 3 times and I was tired of replacing components on the circuit board to make it last another year. I looked at buying a new one from aerogarden but they are crazy expensive. So I designed…
RepRack Barrina T5 LED Clip Description Clip for the Barrina T5 LED light strips to attach to the RepRack Hanger Included Files STL - Ready for 3D slicing. reprack_barrina_t5_led_clip.stl STEP - Editable file for modifications.…
A sleek, minimalist mount designed to support a single LED light bar like the Barrina T5 60–120 cm . It’s made to hang from two lateral points , offering more stability than central-hanging systems — ideal for grow racks, under-shelf…
This is a shroud for the Barrina Orbgrow OG09 LED Puck Grow Light . It's designed to reduce side glare and limit UV exposure to nearby furniture and other surrounding items. Recommend printing with a heat and UV tolerant filament such as…
This hanging shackle bracket snaps onto Barrina T5 grow lights bars and adapts them to hook mounting. Uses M3x30 screw and locknut. PETG & stainless hardware recommended. Print with supports. Clip is fairly stiff and requires some force…
I have a workspace where I top mounted the Barrina T8 LED Light and it just so happened that it was around head level. I would always get blasted with light and it would make working here annoying. I created a simple shade that slides in…
Got some Barrina grow lights with 3ft shelves but found out they index off of the shelf. I made these spacers that have holes for two zipties to fit snug and enough space to stick the back side of the metal plate that's included with the…
This is a clip/holder for the Barrina T8 led 2ft. lamp. It clamps to the underside of the Menards MasterForce Industrial Shelf. This can either be mounted inside the shelf, to shield the onlooker from direct light or hung underneath the…
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
I used @LeeWeaver_1455094 Barrina T8 Plant Grow Light Stand and modified it to fit 2 of the T8 Lights. Lee had an excellent design that worked very well but I needed to hold more than one light and I had a really tight fit with the base…
This is a magnetic clip / holder for Barrina T8 LED lights. There are 2 models one fits 20x3mm and other fits 36x7mm . I found for 8ft lights the 20x3mm wasn't quite robust enough for my use, but could be used by someone. My shop has…
I redesigned it so it fits two in a row. Thanks to D Rogers for the original.
A simple model that allows you to suspend two of the Barrina T8 2FT grow lights above a collapsible crate. The light base has a lip clearance of 13.2mm.
The metal clips that come with the Barrina 4FT LED T5 Integrated Single Fixture off Amazon are very flimsy and come with a screw that is less than 1/2". This is not long enough to go through drywall for a long lasting connection on the…
Bracket that clips onto a Barrina brand T5 LED fixture . Use three per fixture. You could use a #4 Imperial if you don't have an M3 wood screw.
I created a slightly bigger version of this, offset from the wall 100mm. All credit to @Max_132062 for original.
Bracket for Barrina T5 that allows for mounting to the side instead of the top.
i used these to attach he lights to the arm https://www.printables.com/model/1074694-barrina-grow-light-adaptors-for-hydroponics-tower/files
Barrina Clip for IKEA SKÅDIS LED light bar holder A remix of mistic100's IKEA SKÅDIS LED light bar holder , with the clip resized to fit a Barrina T5 LED light bar (~20.5 × 20.5 mm cross-section). The mounting interface is unchanged, so…
I split a Barrina LED light strip so that I could utilize one light fixture and light two different areas. I needed some end caps to finish off the ends that I cut. I added some holes in the end caps to allow wires to pass through. Here‘s…
I needed a way to mount the light switch for this LED light setup in my basement. This is my solution. The switch has a concave back and it kept slipping when trying to mount it flat. This design has a arch so that you can use a thin…
I realize the original model was intended for the lights to be inserted all the way into the bracket, but I found that snapping them in this way works great and is a bit easier to do.
This is a magnetic clip / holder for Barrina T8 LED lights. There are 2 models one fits 20x3mm and other fits 36x7mm . I found for 8ft lights the 20x3mm wasn't quite robust enough for my use, but could be used by someone. My shop has…
