Barrina T8 Grow Light Vertical Bracket for 2 Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Great solution for hanging your T8 lights vertically in your grow tent
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple bracket to easily hang the Barrina T8 lights vertically (with original hardware that comes with the lights) in your grow tent for setups such as aeroponic towers.
There are 2 different brackets available to download with the only difference being the spacing between lights:
- Wide Bracket - 37mm space between light reflectors
- Narrow Bracket - 4mm space between light reflectors
Simply put a bracket at the top and bottom of the lights so they're secure. You can tether the bottom to the floor if you'd like but these seem to hang vertical by themselves.
Printing Settings:
- Print face down with no supports
- 15% infill
- Printed in PLA
NOTE - I used the double sided mounting tape that also came with the lights for more stability once metal bracket was screwed to the printed bracket. I'd say it make a marginal difference so feel free to use them, or save them for another project. Metal brackets are plenty sturdy with just the screws provided with the lights.