Window Bird Feeder

A bird feeder which is mounted to a window using suction cups.

As you very likely don't have the exact same suction cups as I used, I also uploaded the Fusion 360 file. The required values can easily be changed with Fusions parameters ("MODIFY" => "Change Parameters")

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@Whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| CORE One | CORE One Kit | MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Additional Parts

The only thing you need are three suction cups like the one below. 

Customize

To customize the openings for the suction cups, you need to measure these parts of the suction cup:

Then change the corresponding parameters in Fusion 360:

NOTE: I didn't play around with different values too much, but I hope it works fine for different sizes.