1 / 4
Sunlu FilaDryer S1 filament guide with hygrometer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearing based rollers for filament and hygrometer holder for the Sunlu FilaDryer S1 and S1 Plus
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 570
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
I used Thekroll's original filament guide and added a hygrometer holder and a chute to the outer bearing assembly. I've used the guide for months and found that sometimes the filament gets squirrelly and likes to pop out where I put the chute/filament guide.
Uses a LCD FY-11 or similar hygrometer
Requires 4 608ZZ bearings
4 M4 x16 bolts, nuts and washers