Picture Frame Wood Box Assembly Corner Clamp Ratchet Strap Repair Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to repair a broken picture Frame. Really happy with how the clamps turned out. 1inch (25.4mm) strap shown.
- Ocena
- 5 / 5
- Polubienia
- 122
- Pobrania
- 438
- Wydruki
- 6
- Wyświetlenia
- 2304
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed to fix a picture frame for a family member. Printing 4 of these along with a ratchet strap worked WAY better than I though it would. Turned out Great.
Ratchet Pictured is 1in (25.4mm). I assume any strap from ¾" to 1 ¼" (19.05mm to 31.75mm) will work fine. You could always Adjust Z height.
Model MAY print okay without support, but I went ahead and used tree support just to be safe.
2ND MODEL HAS BUILT IN STRAP RETAINERS. NOT NECESSARY, BUT HELP STRAP STAY IN PLACE AND YOU COULD KEEP THEM WITH STRAP THROUGH FOR STORAGE. 2ND MODEL DEFINITELY NEEDS SUPPORT!
God Bless,
BowieInc
EDIT: Added addition model for smaller frames. May work better for all frames as it has a floor frame will sit in preventing corner pieces from moving when tightening ratchet strap.
One additional not, the large can be used but you need to prop frame up with thin books to have frame line up with the middle of the corner pieces so they wont slide out one way or the other.