LED Cob Strip Clips for Caldwell Ballistic Chronograph
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips to hold LED cob strips on top of the sun shades of a Caldwell ballistic chronograph
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I made these clips to hold some cheap LED cob strips on top of the sun shades for low light use. I first tried with some RGB strips that I had, but the LEDs were spaced too far a part and produced mostly errors.
Printed in PETG using spiral vase mode at 0.3mm layer height, and with no bottom layers. I also included gcode that was sliced at 0.2mm in case of layer adhesion issues.
The LED strip I used is 2mm thick and 8mm wide. Here is a (non-affiliate) link to the exact one I used: https://www.amazon.ca/gp/aw/d/B0C2P8CZBD?psc=1&ref=ppx_pop_mob_b_asin_title