1 / 5
RIP Gravestone Pencil Holder + Halloween Decoration
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The RIP Gravestone is available in several models including a spooktastic Halloween decoration and a pencil holder.
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 384
- Wydruki
- 3
- Wyświetlenia
- 1207
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Standard Digital File License
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (0)Kolekcje (140)Powiązane
The RIP Gravestone is available in several models including a spooktastic Halloween decoration and a desktop holder for pencils, pens, markers, and more!
RIP Gravestone (Halloween Decoration)
- One model includes glue holes for the insert, and another model without the holes.
RIP Gravestone Pencil Holder
- One model includes glue holes for the insert, and another model without the holes.
RIP Gravestone Insert
- Lay the insert over the face of the RIP Gravestone and press into place.
- Glue is not required but if you'd like to glue the insert into place please print the desired model with holes included.
Gluing Instructions:
- Lay the RIP Gravestone on it's back so the lettering is facing upwards
- Add a drop of glue in each glue hole
- Lay the insert over the face of the RIP Gravestone and press into place
- Wait for the glue to dry before turning the RIP Gravestone upright
Print Settings:
- Enable support with 30° threshold angle
- Concentric top surface pattern
- 0.08mm layer height for more detail
- 0.2mm layer height for a faster print
Notes:
- Support is recommended to preserve some of the detail. It's minimal and easy to remove.
- Shown as printed at 0.08mm layer height