116 modeli
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Like my Tony Stark bust i designed Steve Rogers' bust in honor of actor Chris Evans. He will be our first avenger forever. I hope, you will like it. Print instructions Unassociated tags: chris evans, steve rogers Category: Art Print…
A Zbrush sculpt of Roger Moore. Scale it to your needs and use the organic support option (Prusa Slicer)
I created this Straw Hat Jolly Roger in honor of my favorite anime One Piece. This was created in tinkercad and utilizes color changes via Prusa Slicer. Because of some thinness on the top black layers I used top layer ironing. I've…
Added the Queen name to Roger's bassdrum :D Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: SUNLU PLA Black Category: Other
ORIGINAL ON THINGIVERSE Summary roger and other designs are also available on shapeways: http://www.shapeways.com/shops/animoos I updated the pose to improve rogers balance and keep the head to bend back when using a vapor bath I was…
ROGER - BONG - AMERICAN DAD - WALL ART
lighter case designed to fit your standard sized Bic lighter adorned with the Jolly Roger
So, thank you to Scottdee for the original parts that he posted. These parts were too low resolution for my taste and looked blocky when printing them. I used Scott’s specs, but totally re-built the main body and thrusters from scratch. I…
I received a request for additional One Piece Cookie Cutters, specifically the Jolly Rogers of Mugiwara. I'm still not sure what their official names are, but I gave it my best shot. If anyone can please send me the correct names, I will…
Aug 28, 2023 Update: The rear bumper has been modified to accommodate the knobs the Roger Charger v3. The corners have been modified to make them easier to print. The Roger charger (sold under the name “Hyper Charger” at Alien Rides) has…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Quick wall mount for the Rogers/XFinity XB7 modem. I'd recommend the halo for high traffic area's; otherwise you should be good. I'd recommend 0.2 layer height with 3-paramiters. 25% infill should be good.
3d version of the Jolly Roger
One Piece Jolly Roger (ワンピース) Category: Games
With the original author's permission for a remix, I can release those parts of the model.
My own take on the Toon Gun from Who Framed Roger Rabbit. Based on screen captures and the original foam prop. Haven't printed or assembled yet. No pegs or holes except for the hammer (which is to long, I know.) Not sure if I will take on…
Hello, I have Roger from the TV series American Dad for you. It is suitable as a decoration or just for an exhibition. Suitable for coloring for children. The character was inspired by the TV series. My children love these characters :).…
This easy to print model fits together nicely and is robust enough to handle the play of my 2-year old daughter who now knows the Neighborhood Trolley from watching the animated version of my old childhood show.
Pirate Flag of Jack Rackham, also known as Calico Jack Rackham. This flag is most commonly identified as the Jolly Roger today. This version is also known from Disney's Pirates of the Caribbean. Easy print, just do a color change when the…
Print these in the shiniest silver filament you can find. I use YOUSU off of Amazon (https://www.amazon.com/gp/product/B0854KYS6F) It will only work with hubs that support the 12x6 bolt pattern, though it may be possible to design a…
“I like Lena Dunham. It's nice to see someone with my exact body type succeed.” - 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) (BIG THANK YOU to ChellaBelleM3d for…
LOTS MORE! DeskBuddys here: DeskBuddy Collection by CheekyTomato | Printables.com Rate, like & comment . So Roger can finally afford more wigs and questionable disguises! Recommended Print Settings: Layer height: 0.16–0.2 mm Line width:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Coin with a the pirate banner erroneously attributed to Calico Jack engraved in it. Uses art from PublicDomainVectors.org , also available from Wikimedia Commons .
Print the flag halves flat and add a color change before the skull starts. When finished, glue the two halves together so you have the skull on both sides. With a 0.2 mm nozzle, the resolution is much better. The one in the picture I…
Jolly roger coin (pirate coin) I made this thing for a local scout event. Sizes Big 5 cm Med 4 cm Small 2,5 cm Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.1 mm Infill: 10% Category: Coins &…
My adaptation on the Monkey D Luffy's Straw hat Pirate Jolly Roger keychain from the anime One Piece
Buck Rogers in the 25th Century - The Searcher - 1979-1981 3D printable model.
Join the crew and set sail for adventure. Print instructions Switch the filament out from white to yellow at 1.55mm and switch from yellow to red at 2.45mm. Then switch out the red for the black at 3.20mm. I've included gcode with the…
Jolly roger woggle I made this for a pirate themed scout event. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15mm Infill: 10% Category: Accessories
Buck Rogers starfighter for Minimates. Inspired by the TV Show and the Mego toy of my childhood. If you like this one, check out my other designs. I print the alignment cubes at 95% for an easier fit. You will need to print multiples of…
This is my take on on the roger charger bumpers. The other design didn't print well on my printer because of the overhangs and i wanted to get a closer fit on the face of it. While I was redesigning it i added labels and used the bumpers…
Roger Corman Poe Series - The Pit and the Pendulum - 1961 3D printable model.
I designed this Nug Mug with two separated compartments to keep your nugs or tobacco from contaminating your smoking accessories such as lighters, papers, pokers, and other tools while also keeping them conveniently together. Print…
Mr. Rogers' Neighborhood - Fred McFeely Rogers - 1968-2001 3D printable model.
Modèle dédié aux utilisateurs d'un MMU.
Chrichton from Buck Rogers 70;'s style OpenSCAD code supplied. Not much customizable in this model. Head may be turned.
A model of the Eureka from Space Quest 5. The Eureka was a Hoover Class Garbage Scow captained by the player character Roger Wilco. Follow me if you would like to stay notified about all my future designs. Find more of my designs at Cults…
I made these bumpers to keep my charger from getting scratched up when I set it down on the pavement at an EV charge station. They're designed to work with the modified Huawei R4875G1 chargers sold by Roger Charger and GuLi. Currently,…
Handdoekdroger kapstok, Towel dryer coat rack, Handdoekdroger haak, Towel dryer hook. Deze haak past rond de ronde staven van een badkamer verwarming. PLA filament rekt uit en na een tijdje vallen de kleren er af. Abs filament is beter.…
IMDB says Buck Rogers was a superhero.
Design Concept The Happy Jolly Roger Keychain brings a playful twist to the classic pirate symbol, featuring a smiling skull and crossbones design. This whimsical take on the Jolly Roger allows anyone to sport a bit of pirate fun in their…
Wife wanted a Jolly Roger pendent for her halloween costume. She could not find what she wanted, but came across some blank pendent holders at Michaels. So I designed this insert to go in them. Thought I would share. Printed with PETG,…
Roger Corman's Poe Series - The Fall of the House of Usher - 1960 3D printable model.
Keychain from the Pirate Flag of Jack Rackham, also known as Calico Jack Rackham. This flag is most commonly identified as the Jolly Roger today. This version is also known from Disney's Pirates of the Caribbean. Easy print, just do a…
Check out my 3D Version of the Jolly Roger from my favourit anime One piece. it looks great painted, can´t get enough of it. You will need no support when printing it in two halfs. You will find the cut and solid Version to download. I…
Check out my 3D Version of the Jolly Roger Lamp from my favourit anime One piece. This is a Nightlight version of the Jolly Roger The parts need a little bit of support. As well you need the LED tea light to switch on and of the lamp by…
One Piece - Straw Hat Pirates - Zoro Jolly Roger Clock Face with Clock Mechanism Housing! This clock was originally designed as a companion piece to the Luffy Jolly Roger clock face design (also available here on Printables!). The same…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to create a custom Mister Rogers fig…
Recording Artists - Roger Daltrey
100x160mm sign, with art of a Jolly Roger, skull and crossed cutlass swords. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Corgi: Buck Rogers Starfighter - Spare parts Plastic parts that tend to get lost from the original model: Missiles / Rockets Wheels I've had to do a bit of trial and error on these as I didn't have the original sizes or parts, these work…
Roger the Alien from American Dad! Please like and follow for more!
Gol D. Roger keyring with two options for printing: -Option 1. Multi-material system -Option 2 Single system. To print in several colours with this option make the colour changes at these heights (layer height of 0,2): -Start with white…
My attempt to create a Buck Rogers-inspired statue. You may have to resize this model to fit your gaming needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it…
Made from pics I found & liked. Models may not be perfect. Made to 150mm (may differ due to pose). Made in STL & 3MF.
Prince Rogers Nelson — Buste 🇫🇷 Description (Français) Ce buste rend hommage à Prince Rogers Nelson, figure majeure de la musique moderne, dont l’audace créative et la liberté artistique ont profondément marqué la fin du XXᵉ siècle.…
My son wanted to be Mr. Rogers for Halloween this year so I made this trolley sign that connects to the top of his Duplo Lego train that looks pretty similar to the Trolley from Mr. Roger's Neighborhood. For the sign to be 2 colors I…
One Piece - Straw Hat Pirates - Tony Tony Chopper Jolly Roger Clock Face with Clock Mechanism Housing! This clock was originally designed as a way to challenge myself. I had just done the Luffy Jolly Roger for my buddy (also available on…
Zo kan je handdoeken ophangen aan de kast deuren. Misschien moet je de dikte wat aanpassen voor over jouw deuren te hangen. Het binnen werk is wel in een flexibel materiaal geprint. This way you can hang towels on the cupboard doors. You…
Find some replacement parts and easily chip your 2-4-2 steam loco with the PCB replacement for a mXion Drive M decoder : Screw the replacement into your locomotive. The decoder is simply clipped in and can be removed for maintenance (no…
Remix of Flipped 3D Printed Fabric (by codfish06) with Skull and Crossbones (by Sev in openclipart.org). No MMU is required. Like the rest of my remixes it prints face down and the colour changes can be done manually. The graphics tiles…
Roger Brooke Taney was fifth Chief Justice of the United States Supreme Court. Nominated to the court by Andrew Jackson, Taney is best known for his decision in Dred Scott v. Sandford . In the decision, Taney held that African-Americans…
a basic butt plate for the Roger Super Stoc. I used TPU 3 to 4 wall with 10% to 25% infill.
Antoine Jean-Baptiste Marie Roger de Saint-Exupéry – Buste 🇫🇷 Français Ce buste représente Antoine de Saint-Exupéry , écrivain, aviateur et figure majeure de la littérature française du XXᵉ siècle. Inspiré de la photographie la plus…
Update: I have changed the files for the head, frame, and bottom covers. The head now has an insert for the eye so it won't have the ugly seam. I changed the frame and bottom covers to add a print in place battery door. The new files have…
One Piece - Straw Hat Pirates Jolly Roger Clock Face with Clock Mechanism Housing! This clock was originally designed as a gift for a buddy who loves One Piece. Due to copyright and IP laws, I'm not able to sell these clocks, so I'm…
This is my take on Buck Rogers for the TV show Buck Rogers in the 25th Century. You may have to resize this model to suit your needs.
⚔ Zoro Jolly Roger 3D Logo / Display Model ⚔ Porta nel tuo spazio il leggendario emblema di Roronoa Zoro di One Piece con questo fantastico logo 3D targato staccato, progettato nei minimi dettagli per una resa estetica eccezionale! Il…
One Piece Pirate Flag Keychain – 3D Printable Fan Art Set sail with this 3D-printed keychain inspired by the iconic pirate flags from One Piece ! This design is perfect for fans of the anime who want to carry a little bit of the Grand…
I made this glow‑in‑the‑dark Jolly Roger as a wall‑mounted decoration for my grandson, who likes pirate themes. The original model had the teeth, skull, and jaw as separate pieces, and the crossed bones were in three separate parts. I…
Original design by @ZombieBatman Added text for voltage / amperage +- Added an inset slot if you want to print your own inset logo or something Added a 1 line built-in support for the charger cable hole so you can print without supports…
This electric pepper mill works well, but consumes all 6 batteries (4 AAA indicated on the label :) )at the speed of light, and the motor torque is too low because the battery voltage drops rapidly. I had the misfortune of leaving…
Croc jibbit with the Jolly Roger from One Piece on it. Print face down for best results
This is a button with a Jolly Roger embossed on top. This was designed to be resin printed, but could easily be FDM printed too. Although I modelled a small hole for a dowel to be inserted,I ended up just screwing into the back of it. I…
Recreation (from photos) of the greebly (greeble) on the left hand side of the HG Toys Buck Rogers in the 25th Century helmet. Might want to scale down to 98% for better peg placement.
Two variations, with and without Toronto 2018 text. Printed well in PLA 0.4mm nozzle.
Free swappable plank set for the Modular Round Shield Housing Kit . Five PETG planks with a 4-colour Straw Hat pirate jolly roger emblem. Designed for 3-7 year olds who may be bold but need a little protection when facing their older…
We needed a bumper style case to help distinguish between our two rogers in our home, and as you can only officially buy either green or black online we wanted a bit more customisation so I designed my own by taking an overhead picture so…
Cool little sign to put on your bar, or liquor cabinet. Sign is 5.3" wide, and 3.1" tall. There two versions of this model. Flatback, and the second has holes for 10mmx1.8mm magnets (.393" x .072") so you can put it right on your beer…
Capot de protection pour moteur Roger.
The major building campus of Rogers OMP Headquarters near Jarvis and Bloor in Downtown Toronto. I have made the building manifold and included the bridge across Jarvis St. to the north building as well. Building sourced from Toronto's 3D…
I created a template for the Strawhat's Jolly Roger. With the use of my 3d printer and a little bit of woodworking, I was able to create the perfect piece of wall art for my new office! If you're curious about my whole process, check out…
This is Roger The Robot! He is a cute robot that I created. He is fragile in some places. These places are the neck, the antenna, and the hips. I recommend that he be used only for decoration.
Das Original war der hübsche Schädel von Janus Kottisch. Nun wurde daraus ein Jolly Roger und eine Spardose. Erlaubnis zum Posten der veränderten Modells liegt vor. Ursprungsmodell des Schädels:…
A replacement for worn-out or lost Rogers Beavertail-compatible large lug gaskets, the piece between the lug and the shell. One end is slightly narrower, following the lug's shape. Fits: Rogers Beavertail-compatible large tom and bass…
ORIGINAL ON THINGIVERSE Summary roger and other designs are also available on shapeways: http://www.shapeways.com/shops/animoos I updated the pose to improve rogers balance and keep the head to bend back when using a vapor bath I was…
Antoine Jean-Baptiste Marie Roger de Saint-Exupéry – Buste 🇫🇷 Français Ce buste représente Antoine de Saint-Exupéry , écrivain, aviateur et figure majeure de la littérature française du XXᵉ siècle. Inspiré de la photographie la plus…
Free swappable plank set for the Modular Round Shield Housing Kit . Five PETG planks with a 4-colour Straw Hat pirate jolly roger emblem. Designed for 3-7 year olds who may be bold but need a little protection when facing their older…
This is Roger The Robot! He is a cute robot that I created. He is fragile in some places. These places are the neck, the antenna, and the hips. I recommend that he be used only for decoration.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x112.76mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.8mm and the Actual Depth is 1mm…
Buck Rogers, XZ-38 Disintegrator Pistol
This thing was created by Thingiverse user Periechild, and is licensed under cc.
