Bosch Professional GAS 12V filter cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover that holds a pre-filter, preventing debris from clogging up the pleats of the original filter.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 274
- Wydruki
- 7
- Wyświetlenia
- 1070
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The unfathomable ways of Bosch… The ‘professional’ version of this small vacuum doesn't come with a pre-filter; where the cheaper green version is supplied with one (and with a lot of accessories too…).
It is quite annoying to clean the filter, as all debris, sawdust etc. gets lodged inbetween the pleats of the original filter. I actually didn't use the vacuum much, because I hated the messy job of cleaning out the filter…
3D-printing al rescate! I modeled a filter cover that will hold a pre-filter, cut from a filter that came with vacuum bags for my household vacuum.
Now most of the debris can just be brushed of the filter, easy.
Printing
Printed upside down in PETG with a 0.4mm nozzle, 0.65mm extrusion width and 0.2mm layer height.
Designed to print without supports.
As always, please let me know any suggestions for improvement.
Bart