1 / 2
MiniSkiddi V2.0 axle/hub reworked for GT-2 belt — zdjęcie 1
1 / 2

MiniSkiddi V2.0 axle/hub reworked for GT-2 belt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based off the original axle/hub for the MiniSkiddi V2.0, but modified to work with a GT-2 x 160 x 6mm belt

Ocena
4 / 5
Polubienia
4
Pobrania
56
Wydruki
0
Wyświetlenia
372
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model allows you to use a standard GT-2 timing belt rather than a printed belt on your V2.0 MiniSkiddi.

The GT-2 pulley portion was created in Fusion 360 using this parametric model: https://grabcad.com/library/parametric-gt2-pulley-1  – Fusion 360 was used to modify and merge the original part and the parametric part and then exported.

There were two versions of the original part – one with a hole for the motor drive, and one without.   I only created a version for the motor drive, but it can be used for the non-driven axle as well.

Tagi