Replacement float for Whirlpool, Maytag, Jenn-Air, Kitchenaid dishwashers.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled this part to replace the float in my KUDC20fvss3 kitchenaid dishwasher.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Designed in Blender, printed in ABS on a Prusa MK3S+
I had no luck printing a complete, one-piece replacement part because the ABS overhang would warp too much, so I created a completely new model that requires minimal support. There are three separate pieces that can be fit together to make the complete part. The long, threaded part is stronger when printed flat, but requires a little support and the threads should be sanded lightly where affected by the supports.
My print settings:
- PrusaSlicer
- ABS Plastic with Prusa generic ABS default settings
- .15mm layer height
- Brim
- Support on Build Plate Only
Each dishwasher is different and you should carefully test that this replacement part is functioning correctly; a failure could cause flooding and damage and use of this part is at your own risk!