Spirographic WDT tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Bearing based spirographic WDT by Kensei @Kensei_237841, with a shorter footprint.
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 342
- Wydruki
- 1
- Wyświetlenia
- 7730
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of the Bearing based spirographic WDT by Kensei @Kensei_237841. Also used some modifications made by @ungodly and @Kampflafer, so it has no handles and has fixed positions for the external needle.
I have splitted the lower body in two, and made it threaded so that it prints with no supports. With this I removed the sloped part and made it a little bit shorter.
It also has a shorter bottom than the original from Kensei, this way it fits the portafilter of the best espresso machine ever invented, the Gaggia Classic! I have also added a stand to rest the unit.
Printed nice in PLA, no brims, with a 0.6 nozzle, 0.2 layer height, 15% gyroid infill.
Modified BoM
4x M3x12 screws
1x M3 nut and a longer M3 screw (just to press fit the bearings)
8x MR63ZZ ball bearings (those are 6 mm in OD, 3 mm ID and 2.5 mm height)
2x 6813 type ball bearings (those are 85 mm OD, 65 mm ID and 10 mm height)
10x acupuncture needles
Needles fit just fine, I fixed them with a tiny drop of regular white glue so that I can remove them if I need to.