MagSafe Stand-by
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet ANOTHER MagSafe charger stand
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have created my own version of the MagSafe wireless charger stand.
This is designed to press fit a generic MagSafe wireless charger for your desk or nightstand. Tall enough for Portrait mode if that is your desire.
The charger I designed this for is 56mm diameter and 5.7mm thick. amazon.com/dp/B0BGBKDLXC?psc=1&ref=ppx_yo2ov_dt_b_product_details
Should not need supports. If you do, it will be only for the very tip up at the top.
I have included an open top version and a closed top version. The open top version may work better if you're having a tolerance issue getting the disk to press-fit and is less likely to need supports.
I printed mine at 0.2mm layer height with 15% gyroid infill using 4 perimiters/walls.